Bine ai venit!
Contul Meu

TL Audio -A1 Preamplificator dual cu tuburi, circuit discret cla

Cod produs # TL -784
Email
3.12500 Lei

 

Livrare gratuita

Pentru comenzi online de peste 500 RON

021 425 29 090755 376 8630722 376 8630766 376 863

TL Audio A1 este un preamplificator dual de microfon cu tuburi ce, datorita circuitului discret clasa A, ofera o inalta calitate a sunetului, nivel de zgomot extreme de scazut si un excelent raspuns in frecventa. Sunetul cald al tuburlor poate fi inclus in stagiul de preamplificre in orice proportie, C1 devenind astfel o unealta versatila, potrivita multipleor nevoi ale studiourilor de inregistrari modern.

Specificatii tehnice

Mic Input:
Discrete Class A circuitry from input to output (unless Tube stage In).
Gain Range: +16dB to +60dB (-14dB to +30dB with pad),
Maximum Input level: +10dBu (without pad), +30dB (with pad),
Frequency Response: 10Hz to 40KHz, +0, -0.5dB, @ 40dB gain,
Distortion (THD + Noise): 0.025%, 20Hz to 20KHz @ 40dB gain,
Noise (EIN): -127dBu unweighted, 22Hz to 22KHz, 150 ohm source termination.
Instrument Input
Tube input stage, plus discrete Class A circuitry to output.
Gain Range: +8dB to +40dB (�High�), -10dB to +22dB (�Low�),
Input Impedance: 1Mohm (�High�), 70Kohm (�Low�).
High Pass Filter
-3dB @ 90Hz, second order.
Output Gain
Maximum Gain +15dB.
Output
Maximum Level: +22dBu (2Kohm load), +26dBu (10Kohm load),
Noise at minimum gain: -90dBu (22Hz to 22KHz).
Tube Stage
Typical Distortion: 1% to 10%, depending on �Drive� level, predominately
second harmonic.
Noise: -80dBu (22Hz to 22KHz), output gain @ 0dB.
Metering
Tube �Drive� LED: Variable intensity over 10dB level range, typically corresponding
to 1% to 5% THD.
Tube �Peak� LED: Dependant on level and drive, typically corresponding to 10%
THD.
Output �Peak� LED: +19dBu on output.
VU Meter: Switchable to Channel 1 or 2, and Input or Ouput.
Nominal calibration: 0VU = +4dBu.
+10dB switch calibration: 0VU = +14dBu.
Power Requirements:
Internally set to 230V 50Hz or 115V 60Hz operation,
Detachable IEC power cord,
Power consumption 34VA.
Dimensions
2U, rack mounting or free-standing.
W x H x D = 483mm x 88mm x 200mm (19.0� x 7.9� x 3.5�), behind front panel.