Bine ai venit!
Contul Meu

TL Audio -A3 Channel strip cu egalizator si compresor pe tuburi

Cod produs # TL -786
Email
4.06300 Lei

 

Livrare gratuita

Pentru comenzi online de peste 500 RON

021 425 29 090755 376 8630722 376 8630766 376 863

A3 este un channel strip ce incorporeaza in aceeasi unitate avantajele cunoscutelor preamplificatore, compresoare si egalizatoare TL Audio. Avand acelas design cu circuit discret clasa A si tuburi, A3 este foarte versatil si are toate calitatile necesare pentru a deveni principalul canal de voce in orice studio.

Specificatii tehnice

Line Inputs
Discrete Class A circuitry from input to output (unless Tube stage In),
Gain Range: -20dB to +20dB,
Maximum Input level: +26dBu,
Frequency Response: 10Hz to 35KHz, +0, -1dB,
Distortion (THD + Noise): 0.03%, 20Hz to 40KHz,
Noise: -85dBu, 22Hz to 22KHz, @ 0dB gain at input and output.
Instrument Input:
Tube input stage, plus discrete Class A circuitry to output,
Gain Range: +8dB to +40dB (�High�), -10dB to +22dB (�Low�),
Input Impedance: 1Mohm (�High�), 70Kohm (�Low�).
High Pass Filter:
-3dB @ 90Hz, second order.
Compressor
Threshold Range: -20dB to +10dB,
Ratio Range: 2:1 to 20:1,
Attack: 1ms (�Fast�), 8ms (�Slow�),
Release: 200ms (�Fast�), 2s (�Slow�),
Knee: �Hard� and �Soft� settings,
Gain Make-Up: 0dB to 20dB.
Equaliser
LF: +/-15dB @ 80Hz, shelving,
23
Mid: +/-15dB, swept 150Hz to 7KHz, Q = 0.7,
HF: +/-15dB @ 12KHz, shelving,
�Pre� and �Sidechain� (Compressor) switches.
Mic Input:
Discrete Class A circuitry from input to output (unless Tube stage In),
Gain Range: +16dB to +60dB (-14dB to +30dB with pad),
Maximum Input level: +10dBu (without pad), +30dB (with pad),
Frequency Response: 10Hz to 40KHz, +0, -1dB, @ 40dB gain,
Distortion (THD + Noise): 0.035%, 20Hz to 20KHz @ 40dB gain,
Noise (EIN): -127dBu unweighted, 22Hz to 22KHz, 150 ohm source termination.
Instrument Input
Tube input stage, plus discrete Class A circuitry to output,
Gain Range: +8dB to +40dB (�High�), -10dB to +22dB (�Low�),
Input Impedance: 1Mohm (�High�), 70Kohm (�Low�).
High Pass Filter
-3dB @ 90Hz, second order
Insertion point
Pre Compressor and EQ,
Balanced, separate Send and Return TRS jack sockets,
Nominal Level: 0dBu,
Noise -85dBu, 22Hz to 22KHz.
Output Gain
Maximum Gain +15dB,
Output
Maximum Level: +22dBu (2Kohm load), +26dBu (10Kohm load),
Noise at minimum gain: -90dBu (22Hz to 22KHz)
Tube Stage
Typical Distortion: 1% to 10%, depending on �Drive� level, predominately
second harmonic,
Noise: -80dBu (22Hz to 22KHz), output gain @ 0dB.
Metering
Tube �Drive� LED: Variable intensity over 10dB level range, typically corresponding
to 1% to 5% THD.
Tube �Peak� LED: Dependant on level and drive, typically corresponding to 10%
THD.
Output �Peak� LED: +19dBu on output.
VU Meter: Switchable to Input, Ouput or Gain Reduction.
Nominal calibration: 0VU = +4dBu.
+10dB switch calibration: 0VU = +14dBu.
Power Requirements:
Internally set to 230V 50Hz or 115V 60Hz operation,
Detachable IEC power cord,
Power consumption 28VA.
Dimensions
2U, rack mounting or free-standing.
W x H x D = 483mm x 88mm x 200mm (19.0� x 7.9� x 3.5�), behind front panel